How to setup LAN network
First you have to buy LAN ware, a router or a broad band modem, a switch
and rj45 connectors. If you r creating a LAN without using a LAN card then the
connection chart will be as follows:
how to connect rj45 with a LAN cable:
how to connect rj45 with a LAN cable:
1. buy a crimpling tool
2. Cut the cable as you need.
3. Cut the cover.
4. Then cut the wares equally using the tool
5. Color combi nation for the cable:
1. deep brown 2. White deep brown 3 blue 4 white blue 5 green 6 white green 7 Light brown 8 white light brown.
6. Now insert it in the rj45 connector.
7. Use crimpling tool to crimp it
8. Now do the same procedure with another end and other cables.
How to configure PC for internet connection:
1. Go to my network places
2. Click on create a new connection
3. Next --> next ---> set up my connection manually ----> next ----> using user name ---> connect broad band ---> next ----> give an isp name (your operator will provide it) ----> give user name and pass word (your operator will provide it) ---> next ----> finish.
How to configure server computer: 1. connect phone cable in the modem.
2. If u has type 2 a DSL modem, connect your server pc in one of the ports.
3. Go to 'my network' option.
4. Right click on it.
5. Go to 'property'
6. Select local area network
7. Right click on it
8. Property
9. Select 'general'
10. Go to ' internet protocol'
11. Select it
12. Click on 'property' bottom in your right side.
13. Click on 'use the following ip address'
14. IP address: 192.168.0.1
sunet musk: 255.255.255.0
default gate way: blank
15. Select: 'use the following dns addresses'
keep all of it blank.
16. Click on 'ok'
How to configure client computers :
3. go to 'my network' option.
4. Right click on it.
5. Go to 'property'
6. Select local area network
7. Right click on it
8. Property
9. Select 'general'
10. Go to ' internet protocol'
11. Select it
12. Click on 'property' bottom in your right side.
13. Click on 'use the following IP address'
14. IP address: 192.168.0.2 ( u can use 2 to 254 in the last section)
sunet musk : 255.255.255.0
default gate way : 192.168.0.1
15. Select: 'use the following dns addresses'
Preferred dns server: 192.168.0.1
Alternative DNS server: Blank
16. Click on 'ok'
Repeat the same procedure with other client computers.
How to connect a switch ;
connect a cable from router with server pc ----> connect another cable from the rougher to ur Switch ----> connect other cables from switch to client computers.
How to Share internet:
after connecting cables with computers, do as follows:
1. Go to My network places
2.Single Click on the Internet Connection (Having your given ISP name)
3. Right click
4. Property
5. Click on "advanced" option
6. Click on the check box "allow other network................."
now your networking is complete to use. Connect power to Router Modem, switch, and computers
2. Cut the cable as you need.
3. Cut the cover.
4. Then cut the wares equally using the tool
5. Color combi nation for the cable:
1. deep brown 2. White deep brown 3 blue 4 white blue 5 green 6 white green 7 Light brown 8 white light brown.
6. Now insert it in the rj45 connector.
7. Use crimpling tool to crimp it
8. Now do the same procedure with another end and other cables.
How to configure PC for internet connection:
1. Go to my network places
2. Click on create a new connection
3. Next --> next ---> set up my connection manually ----> next ----> using user name ---> connect broad band ---> next ----> give an isp name (your operator will provide it) ----> give user name and pass word (your operator will provide it) ---> next ----> finish.
How to configure server computer: 1. connect phone cable in the modem.
2. If u has type 2 a DSL modem, connect your server pc in one of the ports.
3. Go to 'my network' option.
4. Right click on it.
5. Go to 'property'
6. Select local area network
7. Right click on it
8. Property
9. Select 'general'
10. Go to ' internet protocol'
11. Select it
12. Click on 'property' bottom in your right side.
13. Click on 'use the following ip address'
14. IP address: 192.168.0.1
sunet musk: 255.255.255.0
default gate way: blank
15. Select: 'use the following dns addresses'
keep all of it blank.
16. Click on 'ok'
How to configure client computers :
3. go to 'my network' option.
4. Right click on it.
5. Go to 'property'
6. Select local area network
7. Right click on it
8. Property
9. Select 'general'
10. Go to ' internet protocol'
11. Select it
12. Click on 'property' bottom in your right side.
13. Click on 'use the following IP address'
14. IP address: 192.168.0.2 ( u can use 2 to 254 in the last section)
sunet musk : 255.255.255.0
default gate way : 192.168.0.1
15. Select: 'use the following dns addresses'
Preferred dns server: 192.168.0.1
Alternative DNS server: Blank
16. Click on 'ok'
Repeat the same procedure with other client computers.
How to connect a switch ;
connect a cable from router with server pc ----> connect another cable from the rougher to ur Switch ----> connect other cables from switch to client computers.
How to Share internet:
after connecting cables with computers, do as follows:
1. Go to My network places
2.Single Click on the Internet Connection (Having your given ISP name)
3. Right click
4. Property
5. Click on "advanced" option
6. Click on the check box "allow other network................."
now your networking is complete to use. Connect power to Router Modem, switch, and computers
ليست هناك تعليقات:
إرسال تعليق